Category: Decorative Concrete

PRODCUT CATEGORIES

    • Smith Paints Concrete Green Clean Pro
      Add to cart
      • ,

      • Smith Paints Concrete Green Clean Pro

      • $74.00
      • The Smith Paints Concrete Green Clean Pro is a biodegradable non-corrosive liquid cleaning and etching solution developed to prepare a mineral based substrate, such as concrete, brick, pavers, stone, etc., by cleaning off dirt, grime and soluble salts from the pores and surface along with producing a moderate surface texture.  Concrete treated with Smith’s Green Clean Pro results in a neutral…
    • Smith Paints Concrete Epoxy FRM
      Add to cart
      • ,

      • Smith Paints Concrete Epoxy FRM

      • $165.00
      • The Smith Paints Concrete Epoxy FRM  is a high performance, heavy-duty, 3-component 100% solids Epoxy Mortar Kit which is trowel applied to repair damaged concrete as well as rebuild / resurface concrete erosion, gouges, broken joint walls, etc. in heavy traffic, abusive environments needing a durable, quick return-to-service floor.
    • Smith Paints Concrete SKM
      Add to cart
      • ,

      • Smith Paints Concrete SKM

      • $99.00
      • The Smith Paints Concrete SKM is a 2-Component, Fast Setting, Moisture Tolerant, 100% Solids Polyurethane Light Gray Skim-Coat and Patching compound with good elongation to aid in suppressing minor cracks from telegraphing through yet rigid enough for traditional substrate surface repairs on concrete. Walkable in roughly 2 ½ hours to accept subsequent layers/systems as well as sanding with an orbital…
    • Smith Paints Concrete Epoxy MAC100
      Add to cart
      • ,

      • Smith Paints Concrete Epoxy MAC100

      • $469.00
      • The Smith Paints Concrete Epoxy MAC100 is a solvent free, 2-component 100% solids Osmotic Moisture Vapor / Alkalinity Control Epoxy Primer with high capillary penetration capabilities for absorption into porous substrates at all recommended application temperatures. Epoxy MAC100 suppresses Osmotic moisture vapor transmission levels to an acceptable level (i.e. below 3 lbs. at tested rates up to 25 lbs./14 pH per…
    • Smith Paints Concrete Epoxy Primer FW38
      Add to cart
      • ,

      • Smith Paints Concrete Epoxy Primer FW38

      • $89.50
      • The Smith Paints Concrete Epoxy Primer FW38 is a fast curing 2-component, low odor, 38% solids waterborne epoxy primer and sealer for use over concrete, wood and a variety of other substrates.  Smith’s Epoxy FW38 has a 1 hour pot-life and penetrates well into porous substrates at all recommended application temperatures allowing subsequent layers to be applied in a few hours.…
    • Smith Paints Concrete Epoxy VCB38
      Add to cart
      • ,

      • Smith Paints Concrete Epoxy VCB38

      • $90.00
      • The Smith Paints Concrete Epoxy VCB38 is a 2-component, low odor, low VOC, fast-curing waterborne epoxy used specifically as a base coat for full broadcast Vinyl Chip systems in residential, retail and commercial environments. Smith’s Epoxy VCB38achieves a tenacious bond at all recommended application temperatures and cures quickly, allowing for the excess, loose chips to be removed within a few…
    • Smith Paints Concrete Hi-Wear 90S
      Add to cart
      • ,

      • Smith Paints Concrete Hi-Wear 90S

      • $260.00
      • The Smith Paints Concrete Hi-Wear 90S is a 3-Component clear or 4-Component pigmented, Low Odor, 90% Solids, Aliphatic Chemical Resistant High Traffic Urethane.  Its high durability, stain and abrasion resistance make it an ideal topcoat for production and heavy manufacturing environments with potential for exposure to forklift and pallet jack castor traffic, exposure to hydraulic fluids, cutting fluids, solvents and…
    • Smith Paints Concrete Poly-Seal
      Add to cart
      • ,

      • Smith Paints Concrete Poly-Seal

      • $66.50
      • The Smith Paints Concrete Poly-Seal is a single component, fast drying, waterborne polyurethane polymer fused with a cross-linking acrylic which achieves a tenacious bond to approved substrates, with very good resilience, longevity, U.V. stability and wear on concrete. Smith Paints Poly-Seal may be used as a primer for interior and exterior direct-to-concrete applications prior to Smith’s Poly-WB topcoat, as a seal coat…
    • Smith Paints Concrete Poly-WB
      Add to cart
      • ,

      • Smith Paints Concrete Poly-WB

      • $181.50
      • The Smith Paints Concrete Poly-WB is a 2-Component, High Performance Waterborne Polyester Polyurethane sealer used as a hard, durable protective or maintenance wear surface over decorative concrete, pavers, concrete stains, etc. with heavy foot traffic exposure.  Developed for interior or exterior wear surfaces in residential & commercial installations to protect against long-term chalking in high U.V. exposure environments & for…
    • Smith Paints Concrete Polyaspartic 5000 LO
      Add to cart
      • ,

      • Smith Paints Concrete Polyaspartic 5000 LO

      • $209.25
      • The Smith Paints Concrete Polyaspartic 5000 LO is a High Performance, Low Odor, 86% Solids, 2-Component, Aliphatic Polyaspartic with a high gloss finish.  This product yields a U.V. stable, hard, resilient and abrasion resistant film with good splash and chemical spill resistance properties. Smith’s Polyaspartic 5000 LO may be used for a variety of applications to include body coats and wear…